|
Professional Epidermal Contact Diode Laser System
The SDL90-EC produces
220 Jcm2/second
energy density at 808nm with a
pulse duration of 0.09 seconds.
Pulse frequency is
user-adjustable from 1-7
emissions per second.
Unlike the Biotechnique Avance
'standard' laser epilators
(SLD15, 30, 50, 80 and 100
units) the
 SDL
'EC' line is has a specially
designed optic which is designed to
be in contact with the skin.
This allows for far greater
absorption and penetration of
the laser energy to the
desired tissues.
With surface laser epilation
a significant percentage of
the laser energy simply
bounces off the skin or is
absorbed by the hair itself.
This creates an impressive
effect because the laser
'shaves' the skin as it treats
the follicles below, however,
of 180jcm2/second of energy
delivered this way, only about
120jcm2 will pass through the
skin. This is why the SDL EC
line was developed.
It is intended to be performed
in conjunction with a topical
gel paste (which also contains lidocaine for additional
patient comfort). As the SDL
 EC
laser head glides across the
gel-coated skin it delivers
high fluence pulses deeply
into the desired tissues. The
results are faster and more
substantial than the standard SDL line of surface epilators.
It is important
to note that the SDLC series
cool-tip ball lens should
never contact the clients skin
without protective gel paste,
so surface epilation
procedures should be done with
extra care.
Each power pulse has an
effective treatment area of
15mm wide and feels like a
brief pinch. Very
few patients would describe
the procedure as 'painful'.
For those few individuals who have a high degree of neural sensitivity, the use of a mild topical anesthetic is encouraged.
 The
High Output
Epidermal Contact Diode Laser
System has a very comfortable
and versatile hand piece.
The instrument is balanced and amazingly light (under 1 pound) which substantially reduces operator fatigue.
|
*Non-invasive cosmetic procedures such as laser removal are generally classified as 'exempt' from local health codes which regulate electrolysis. In most areas an Electrology license is not required to buy or use this system. Also approved for Acne Treatment, Laser Peel, Skin Resurfacing, Tattoo Removal and General Dermatology
|
System Comes With The Following
High Output Diode Laser
Hand Piece
220 jcm2 energy density (fluence), key lockout safety switch, laser 'enabled' system status LED, adjustable intensity, 2 pair of laser protection eyewear, 150ml carbon dye, tweezers and instructions.
Average safe and effective values for output intensity (fluence) and pulse frequency are included in the instruction material for various skin photo types.
If you are unsure of your client's skin type,
click here for information.
If you are using cosmetics on the area to be treated containing retinoids (retin a, tretinoin, altinac, avita, trans retinoic acid, vitamin A acid, tazorac, adapalene, differin), or AHA (alpha hydroxyl acids, glycolic acid) stop using the cosmetic at least two days before the laser treatment. If you have been taking Accutane (isotretinoin) you should be off of it for two to six months before laser treatment. If you have had a microdermabrasion on the area to be treated it is best to wait seven to ten days before laser treatment.
-
Pulse Duration:
0.09 seconds
-
Pulse Frequency:
Adjustable from 1-7 pulses/second
-
Energy Density (fluence):
0 to 220 Jcm2 (31.43jcm2
pulse/max.)
-
Beam Size and Shape:
15mm BK7
Glass Optics
-
Treatment Time for Dense Moustache Removal: 2
minutes
-
Treatment Time for Dense Chest and Abdomen: 15
minutes
-
Treatment Time for Dense Full Body: 60 minutes
|
Warranty Information: To the original purchaser, the above item will arrive without damage or defect in material or workmanship. This warranty shall extend for a period of 1 year from the date of delivery. Laser diodes and IPL flash lamps are warranted against failure for 5,000 hours (approximate continuous usage of 1 year). Should your system arrive damaged or in otherwise incomplete/unacceptable condition please refer to the warranty repair card in your instruction packet to expedite the return.
|
|
Suggested Retail
$2,999.95
To Order This Item:
Centre Biotechnique Avance
allows manufacturer-direct
wholesale purchases for single
quantity items, however, we
only accept payment by bank
wire. To order this item
at
$1,799.95 wholesale
pricing,
Click
Here.
If you do not wish to pay by
bank wire or require alternate
payment methods including
credit cards, please refer to
the list of authorized
resellers below.
|
How to Order: Biotechnique Avance
does allow for
manufacturer-direct wholesale
purchases for single and
multiple items, however, we
only accept payment by bank
wire. For a list of
our preferred authorized
resellers who can assist you
with additional payment
methods, please refer to the
information below. For
a list additional resellers,
or for wholesale pricing on
larger quantities please
submit a request by email to:
admin@centre-biotechnique-avance.com.
|
 www.laser-cosmetology-equipment.com
Low Price Leader and
Gold Seller. For
excellence in customer
service and sales
performance.
Accepts all payment
options including
Escrow, Western Union
and more. |
|
