|
|
Equipment packages for every need and budget!
|
High
Output Diode
Laser and Intense Pulsed Light System
The LD60-IPL600 produces an impressive 180Jcm2
energy density
at
808nm
(laser light) and
100-800nm (broad based light) with a pulse duration of 0.1 seconds. Pulse frequency
is user-adjustable from 1-10 emissions per second.
Maximum power
output is 400% greater than the recommended level for efficient laser
shaving (on hair growth types 3-6: brown and black). Laser shaving
is also possible with blond and red hair types (2 and 3) using carbon dye.
This system is also excellent for general dermatology procedures, age spot
removal, wrinkle reduction, laser resurfacing and more. May be used
for tattoo removal on most inks.
Why choose between laser and intense pulsed
light when you can have BOTH!
Each hand piece
plugs conveniently into the power system for the ultimate in
versatility and control. If you were to buy the LD60K and the
IPL600 separately, they would cost nearly $8,000. With the new
LD60-IPL600 hybrid you receive the outstanding performance of both 'top of
the line' systems for only $5,999.95. That is a savings of $2000!
The
power pulses have an effective treatment
area of 2cm wide
and feel like a brief
pinch. Very few patients would describe the procedure as 'painful'.
Having the choice between Laser and IPL procedures is a great option
for the professional. There are some tattoo ink colors that
Laser will not remove. Those colors respond well to Intense
Pulsed Light. The advantages are endless.
*For those few individuals who have a high degree of neural
sensitivity, the use of a mild topical anesthetic or pre-treatment
with a cold pack is
encouraged.
Maximum power
output is 400% greater than the recommended level for efficient laser
shaving (on hair growth types 3-6: brown and black). Laser shaving
is also possible with blond and red hair types (2 and 3) using carbon dye.
This system is also excellent for general dermatology procedures, age spot
removal, wrinkle reduction, laser resurfacing and more. May be used
for tattoo removal on most inks.
Click Here to View Treatment Procedure Demonstration
 Laser
Hand Piece Specifications:
Pulse Duration: 0.05 to 0.1 seconds.
Pulse Frequency: Adjustable from 1-10 pulses/second. Energy Density
(fluence):
0 to 180 Jcm2. Beam Size and Shape: 2 cm line optics.
Treatment Time for Dense Moustache Removal: 1 minute.
Treatment Time for Dense Chest and Abdomen: 7 minutes.
Treatment Time for Dense Full Body: 30 minutes
IPL Hand Piece Specifications:
Pulse Duration: 0.05 to 0.1 seconds. Pulse
Frequency: Adjustable from 1-6 pulses/second. Energy
 Density (fluence): 0 to 180 Jcm2.
Beam Size and Shape:
2cm round.
Treatment
Time for Dense Moustache Removal: 3 minutes.
Flash lamp is rated for 1,200,000
pulses which equates to roughly 3-5 years of average daily use for a
salon. The IPL instrument is light (under 2 pounds), durable, and of
very high quality. The optics package is removable and may be
changed for more specific wavelengths using sapphire and ruby ball lenses
(available on 'accessories' page).
Warranty Information: To the
original purchaser, the above item will arrive without damage or
defect in material or workmanship. This warranty shall extend for a
period of 1 year from the date of delivery (additional warranty
extensions are available, see below). Laser diodes are warranted
against failure for 5,000 hours (approximate continuous usage of 1
year). Should your system arrive damaged or in otherwise
incomplete/unacceptable condition please refer to the 'warranty
repair' card in your instruction packet to expedite the return.
Guaranteed Worldwide Utility System
Compatibility! All kits are sent with corresponding input voltage,
hertz, and plug styles for the country of destination. If you have
special requirements please make a note of it in the checkout text
area.
System Comes With The Following
High Output Diode Laser
Hand Piece
180jcm2 energy density (fluence), High Output 600W Intense Pulsed Light
Hand Piece, key lockout
safety switch, laser 'enabled' system status LED, adjustable intensity, 2
pair of laser protection eyewear, 150ml
carbon dye, tweezers and instructions.
Average safe and effective values for output
intensity (fluence) and pulse frequency are included in the
instruction material for various skin photo
types.
If you are unsure
of your skin type,
click here
for information.
If you are using cosmetics on the area to be
treated containing retinoids ( retin a, tretinoin, altinac, avita,
trans retinoic acid, vitamin A acid, tazorac, adapalene, differin),
or AHA (alpha hydroxyl acids, glycolic acid) stop using the cosmetic
at least two days before the laser treatment. If you have been
taking Accutane (isotretinoin) you should be off of it for two to
six months before laser treatment. If you have had a microdermabrasion on the area to be treated it is best to wait seven
to ten days before laser treatment.
|
*Non-invasive cosmetic procedures
such as laser removal are generally classified as 'exempt' from local
health codes which regulate electrolysis. In most
areas an Electrology license is not required to buy or use this system. Also approved for
Acne Treatment, Laser Peel, Skin Resurfacing, Tattoo Removal and General Dermatology |
-
Pulse Duration:
0.05 to 0.1 seconds
-
Pulse Frequency:
Adjustable from 1-10
pulses/second
-
Energy Density
(fluence): 0 to
180 Jcm2
Beam Size and
Shape: 2 cm
line optics laser and 2cm squared round ipl optics
Treatment Time for Dense Moustache
Removal:
1/2
to 1
minute
Treatment Time for Dense Chest and
Abdomen:
4 to
8 minutes
Treatment Time for Dense Full Body:
15 to 30 minutes
|
Warranty Information: To the
original purchaser, the above item will arrive without damage or
defect in material or workmanship. This warranty shall extend
for a period of 1 year from the date of delivery (additional
warranty extensions are available, see below). Laser diodes
are warranted against failure for 5,000 hours (approximate
continuous usage of 1 year). Should your system arrive damaged or in otherwise
incomplete/unacceptable condition please refer to the warranty
repair card in your instruction packet to expedite the return.
|
2.0 cm
line Beam and 2.0 cm diameter IPL round beam,
Power: 0-180 Jcm2
Suggested Retail
Please visit an authorized Biotechnique Avance distributor for ordering
information.
|
|
| |
|
