The LD60K produces an impressive 180Jcm2
energy density
at
808nm with a pulse duration of 0.1 seconds. Pulse frequency
is user-adjustable from 1-10 emissions per second.
Maximum power
output is 400% greater than the recommended level for efficient laser
shaving (on hair growth types 3-6: brown and black). Laser shaving
is also possible with blond and red hair types (2 and 3) using carbon dye.
This system is also excellent for general dermatology procedures, age spot
removal, wrinkle reduction, laser resurfacing and more. May be used
for tattoo removal on most inks.
The Standard Output Diode Laser System
is specifically designed to
deliver highly concentrated photon energy directly
through the skin, thereby targeting hair follicle melanocytes
or photo-reactive dyes.
Each power pulse has an effective treatment area of 2cm wide and
feels like a brief pinch. Very few patients would describe the
procedure as 'painful'.
For those few individuals who have a high degree of neural sensitivity,
the use of a mild topical anesthetic is encouraged.
The
Standard Output Diode Laser System has a very comfortable and versatile hand piece. A powerful 5
cfm
positive displacement micro-fan keeps the semiconductors cool during
usage; thereby increasing the power,
performance and overall life-expectancy of the diodes.
The instrument is balanced and amazingly light
(under 1 pound) which substantially reduces operator fatigue.
*Non-invasive cosmetic procedures
such as laser removal are generally classified as 'exempt' from local
health codes which regulate electrolysis. In most
areas an Electrology license is not required to buy or use this system. Also approved for
Acne Treatment, Laser Peel, Skin Resurfacing, Tattoo Removal and General Dermatology
System Comes With The Following
High Output Diode Laser
Hand Piece
180jcm2 energy density (fluence), key lockout
safety switch, laser 'enabled' system status LED, adjustable intensity, 2
pair of laser protection eyewear, 150ml
carbon dye, tweezers and instructions.
Average safe and effective values for output
intensity (fluence) and pulse frequency are included in the
instruction material for various skin photo
types.
If you are unsure
of your skin type,
click here
for information.
If you are using cosmetics on the area to be
treated containing retinoids (
retin a, tretinoin, altinac, avita,
trans retinoic acid, vitamin A acid, tazorac, adapalene, differin),
or AHA (alpha hydroxyl acids, glycolic acid) stop using the cosmetic
at least two days before the laser treatment. If you have been
taking Accutane (isotretinoin) you should be off of it for two to
six months before laser treatment. If you have had a microdermabrasion on the area to be treated it is best to wait seven
to ten days before laser treatment.
Pulse Duration:
0.05 to 0.1 seconds
Pulse Frequency:
Adjustable from 1-10
pulses/second
Energy Density
(fluence): 0 to
180 Jcm2
Beam Size and
Shape:
2 cm
line optics
Treatment Time for Dense Moustache
Removal:
1
minute
Treatment Time for Dense Chest and
Abdomen:
8 minutes
Treatment Time for Dense Full Body:
30 minutes
Warranty Information: To the
original purchaser, the above item will arrive without damage or
defect in material or workmanship. This warranty shall extend
for a period of 1 year from the date of delivery (additional
warranty extensions are available, see below). Laser diodes
are warranted against failure for 5,000 hours (approximate
continuous usage of 1 year). Should your system arrive damaged or in otherwise
incomplete/unacceptable condition please refer to the warranty
repair card in your instruction packet to expedite the return.
Each power pulse has an effective treatment area of 2cm wide and
feels like a brief pinch. Very few patients would describe the
procedure as 'painful'. 
Average safe and effective values for output
intensity (fluence) and pulse frequency are included in the
instruction material for various skin photo
types.
