|
Standard Diode Laser System
The SDL30 produces an efficient 54Jcm2 energy density at 808nm with a pulse duration of 0.1 seconds. Pulse frequency is user-adjustable from 1-10 emissions per second.
This is a great entry-level laser epilator which is not recommended for tattoo removal
or general dermatology.
If you require a system which
can do those procedures,
please refer to the SDL50 and
SDL80 units.
Maximum power output is 100% greater than the recommended level for efficient laser shaving (on hair growth types 3-6: brown and black). Laser shaving is also possible with blond and red hair types (2 and 3) using carbon dye.
Click Here to View Treatment Procedure Demonstration
The Standard Diode Laser System is specifically designed to deliver highly concentrated photon energy directly through the skin, thereby targeting hair follicle melanocytes or photo-reactive dyes.
 This system has a beam diameter twice that of the
SDL15, with the same intensity.
Each power pulse has an effective treatment area of 2cm wide and feels like a brief pinch. Very few patients would describe the procedure as 'painful'.
For those few individuals who have a high degree of neural sensitivity, the use of a mild topical anesthetic is encouraged.
The Standard Output Diode Laser System has a very comfortable and versatile hand piece. A powerful 5cfm positive displacement micro-fan keeps the semiconductors cool during usage; thereby increasing the power, performance and overall life-expectancy of the diodes.
The instrument is balanced and amazingly light (under 1 pound) which substantially reduces operator fatigue.
|
*Non-invasive cosmetic procedures such as laser removal are generally classified as 'exempt' from local health codes which regulate electrolysis. In most areas an Electrology license is not required to buy or use this system. Also approved for Acne Treatment, Laser Peel, Skin Resurfacing, Tattoo Removal and General Dermatology
|
System Comes With The Following
Standard Output Diode Laser Hand Piece 54jcm2 energy density (fluence), key lockout safety switch, laser 'enabled' system status LED, adjustable intensity, 2 pair of laser protection eyewear, 150ml carbon dye, tweezers and instructions.
 Average safe and effective values for output intensity (fluence) and pulse frequency are included in the instruction material for various skin photo types. If you are unsure of your skin type, click here for information.
If you are using cosmetics on the area to be treated containing retinoids (retin a, tretinoin, altinac, avita, trans retinoic acid, vitamin A acid, tazorac, adapalene, differin), or AHA (alpha hydroxyl acids, glycolic acid) stop using the cosmetic at least two days before the laser treatment. If you have been taking Accutane (isotretinoin) you should be off of it for two to six months before laser treatment. If you have had a microdermabrasion on the area to be treated it is best to wait seven to ten days before laser treatment.
-
Pulse Duration: 0.05 to 0.1 seconds
-
Pulse Frequency: Adjustable from 1-10 pulses/second
-
Energy Density (fluence): 0 to 54 Jcm2
-
Beam Size and Shape: 2 cm line optics
-
Treatment Time for Dense Moustache Removal: 5 minutes
-
Treatment Time for Dense Chest and Abdomen: 30 minutes
-
Treatment Time for Dense Full Body: 120 minutes
|
Warranty Information: To the original purchaser, the above item will arrive without damage or defect in material or workmanship. This warranty shall extend for a period of 1 year from the date of delivery (additional warranty extensions are available, see below). Laser diodes and IPL flash lamps are warranted against failure for 5,000 hours (approximate continuous usage of 1 year). Should your system arrive damaged or in otherwise incomplete/unacceptable condition please refer to the warranty repair card in your instruction packet to expedite the return.
|
2.0 cm Beam, Power: 0-54 Jcm2, Laser Type: Quasi-Constant Wave Diode
Suggested Retail $2499.95
Please visit an authorized Biotechnique Avance distributor for ordering information.
|
